10 HP 230 V 1 Ph Screw Air Compressor 150PSI@39CFM W/80 Gal ASME Tank and Dryer

Description

【Parameters】
Power : 10HP / 7.5KW；
Input Voltage: 230V/60Hz/ 1 phase；
Air Flow : 39cfm；
Max Working Pressure : 125-150 psi / 8-10 bar；
Motor : 6300rpm
Output Pipe Diameter: NPT1"
Package: 77*36*61"
Weight: 900lbs
Tank: ASME 80 gal.
【Application】
Air Brushing,Blow Cleaning,Bolting/Wrenching,Brad Nailing/Stapling,Cutting,Drilling,Finish Nailing,Framing Nailing,Grinding,
HVLP Painting,Hobby Nailing,Hobby Painting,Inflation,Roof Nailing,Sanding,Spraying,Surface Prep
Garage & Industrial
Regular maintenance interval schedule
Every 50 hours or weekly
--- Check oil level.
--- Check intake filter, if necessary clean it.
--- Drain condensation water from oil tank.
Every 500 hours
--- Check and adjust belt tension if necessary (belt driven only)
Every 2000 hours
--- Replace lubricants (for mineral lubricants oil)
--- Replace oil filter.
--- Replace intake filter
Every 4000 hours
--- Replace lubricants (for synthetic lubricants oil)
--- Replace oil separator
--- Clean cooler for dirt
Attention: Attention:
1、 Replace filter element and lubricant after first 500 hours of operation.
2、 Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts.
3、 The service life of compressor depends on the environment conditions such as dust, vent etc.
On Oct 21, 2022 at 01:20:04 PDT, seller added the following information: